Install Guides RSS

You will need a 21mm socket, a 15mm socket, a 16mm socket, and a 17mm socket. A breaker bar for those is best. A torque wrench also, capable of ~20-150lbft.If you lay all the packaging out, you'll find the replacement OEM 21mm bolt, and the new hardware. You can take the single-serve loctite and apply a little to each of the smaller bolts. Let it dry a bit. No need to apply it to the large OE bolt.The OEM pendulum mount will be easy to identify underneath the car. You can start by removing the 21mm, and then you can...

Read more